Williams Pinball

  6 NEW ITEMS 

Good for Service Centers. Great for your profits!
WPC Display Control Board Critical Upgrade

These parts replace the most common parts that destroy your expensive DMC Board.
The old parts cause burning of your PC Board, They can actually burn a hole in it!

Board  Replacement can run over a hundred dollars !

Easy to replace and comes with Easy Installation Instructions.
Just a few dollars will save you time, aggravation and money.
Install this kit BEFORE your board is damaged.
Just take a second and look at the back of yours, How brown is it?

Every WPC game should have this installed.

Kit Includes

2 - 5W Resistors, 1 - 10W Resistor
4 - Zener Diodes, 14 - Heat Resistant Wire Shields

Kit is Only $3.50

Order Part # WDUK-1001

 
WPC Driver Board Critical Upgrade

NOW IN STOCK

After Years of service on these boards, I found this kit to cover most all of the
power problems associated with this board.

The FWBR's have been upgrades to 50A ! Up 15 Amps !!
Cooling fan for Vreg. and local parts so your board doesn't burn
Replaces old and burnt power and field lamp connectors.
Bring the power back to your flippers (WPC-1020)

!!! Surge overload ratings to 400 amperes !!!
These will more then handle the power requirements and are about blowout proof !

Bring the power back to your game !

Every WPC game should have this installed.

Order Kit  # WPC-1010 Includes,

2 - 50A, FWBR, 1 - Cooling Fan, 1 - 15KUf Cap @ 35V, 6 - .156 Pin

J101(7), J102(9), J114(7), J115(12), J120(11), J121(11)

Power and Lamp Replacement Connectors, Silicon Heat Sink Compound,

Heat Resistant Wire Shield.  Instructions Included

Only $ 24.95

Order Kit # WPC-1020 Includes,

3 - 50A, FWBR, 1 - Cooling Fan, 2 - 15KUf Cap @ 35V, 6 - .156 Pin

J101(7), J102(9), J114(7), J115(12), J120(11), J121(11)

Power and Lamp Replacement Connectors, Silicon Heat Sink Compound,

Heat Resistant Wire Shield. Instructions Included

Only $ 29.95

 
Williams MPU

System 3, 4, 6, 6A

Full Connector Upgrade Kit

Order # WMPU-1000

 

 ONLY $5.00
Williams MPU

System 7, 7A

Full Connector Upgrade Kit

Order # WMPU-1001

 

 ONLY $5.50
Williams I / O Driver

System 3, 4, 6, 6A, 7, 7A

Full Connector Upgrade Kit

Order # WIOD-2000

 

 ONLY $ 9.95
Williams I / O Driver

System 3, 4, 6, 6A, 7, 7A

Full Connector Upgrade Kit

With Lamp Resistor Upgrade

Kit and Spacer Shim.

Instructions Included

Order # WIOD-2001

 

 ONLY $ 14.50
15 Pin Female

 

Williams # 5A-9093

Part # COWA-9093

$2.00

 15 Pin Male

Williams #  5A-9094

Part # COWA-9094

$2.00

 12 Pin Female

Williams #  5A-9109

Part # COWA-9109

$1.50

 6 Pin Female

Williams #  5A-9108

Part # COWA-9108

$1.00

Molex

Male / Female .156 Connectors

Nylon / Plastic

 

    

For Information on sizes and pricing   CLICK HERE

.156 Standard Pin. Part Number # 77-2574
Plating Contact Tin over Brass

Maximum Wire Insulation Diameter 2.79mm or .110"
 Wire Sizes 18, 20, 22, 24

 

$ 0.20 each
 $ 0.175 lots of ten
$ 0.1250 lots of 100
$ 0.08 lots of 1000

.156 Gold Pin. Part Number #77-2574-G
Plating Contact Gold over Nickel over Brass

Maximum Wire Insulation Diameter 2.79mm or .110"
 Wire Sizes 18, 20, 22, 24

 

 $ 0.60 each
 $ 0.55 lots of ten
$  0.50 lots of 100
Call Lots of 1000 


Bifurcated Contacts

.156 Standard Pin. Part Number # 77-2578
Plating Contact Tin over Brass

Maximum Wire Insulation Diameter 2.79mm or .110"
 Wire Sizes 18, 20

$ 0.20 each
 $ 0.175 lots of ten
$ 0.125 lots of 100
 $ 0.08 lots of 1000

.156 Standard Pin. Part Number # 77-2525
Plating Contact Tin over Brass


 Maximum Wire Insulation Diameter 1.65mm or .065"
 Wire Sizes 22, 24, 26

.20 each
 $ 0.175 lots of ten
$ 0.125 lots of 100
 $ 0.08 lots of 1000

Fiberboard 3XAA
  Battery Holder

Large Foot Print

Pt # 3AABH33

$3.95

Aluminum 3XAA
 Battery Holder

Small Foot Print

Pt # 3AABH22

$2.50

3 X AA
Battery Holder
w/6" Wires

Part # 3AABH00

Only $1.50 Each
or 10 for $12.50

 

Williams # 5A-9074

Power Supply 3J2
Connector on PCB
Pins Included

Part # COWA-9074

$0.85
Crystal Lights

Not Plastic Rubber Covers
But a translucent color for superior light and color
High output color for your game

.50 Each or box of 10 for 3.50 (Same Color only)

Order Part Number DELIC-44-(R,B,G,Y) (add -10 for box)

Example DELIC-44-R-10 is a box of 10 red

 

 #259

.35 Each
Box of 10 $2.00

DELIS-259 (Each)
DELIS-259-10 (Box of 10)

 

 #44

.35 Each
Box of 10 $2.00

DELIS-44 (Each)
DELIS-44-10 (Box of 10)

 

SILICON OIL W / DISPENSER

 
Made by a major manufacture
(sorry can't say who)
This stuff is so slick it has a warning
on the bottle.
So it will work great on your games
and vending equipment.
3 ml of the finest Silicon oil in an
easy to dispense syringe
with a 1.25 inch .5 mm (ID) stainless
steel tube (Not Sharp, Tip flat)
We tried a drop on a foosball
 rod and it played like new.
Pinball shooter rods, coin mechs,
most all applications that used regular
oil use this super slick SILICON OIL.
Only $3.95 a tube
Get 10 for only $2.50 each.
Save over 35%

 

R/C Module

 

 

New drop in replacement for
the Williams SYS11
Pinball MPU AND SOUND  10 pin SIP
  +++   SAME FOOTPRINT   +++
This directly replaces the
470PF / 4.7 K RC pack.
Mounted on ceramic for
better heat sinking.
 
ECRC-5285
 
1 -  9 = $8.50 ea.
10 - 20 = $7.50 ea.

 

 Williams Program Chips

All models

Includes System 6 Combo
Game Chips

2716 $4.50  -  2732 $5.50
 2764 $6.50, 27128 $7.50
  27256 $8.50  -  27512 $9.95
Price per each.

Please give Name of Game,
Chip Location and
Part Number when ordering

Chips may be new or recycled
Williams Cables
>Made Easy<
Email for low prices on custom made cables or Pinball cables not shown

WPC, WPC95
<MPU to Driver PCB
<J211, J113
CABRC-1001

 

 

$5.00

WPC
<MPU, Fliptronic, SND, DMC
<J202, J903, J505, J601
 CABRC-1002

`

$12.00

WPC
<MPU, SND, DMC
<J202, J505, J601
 CABRC-1003

$10.00

WPC
<MPU to DMC
<J201, J602
CABRC-1004

$5.00

WPC
<DMC to Display wo/Ferrel
CABRC-1005

$7.50

WPC, WPC95
<DMC to Display w/Ferrel
CABRC-1006

$12.00 

WPC
<MPU to Aux Driver PCB (R)
J204, J1
CABRC-1007

$7.50

WPC
<MPU to 8-Driver PCB (L)
J204, J1
CABRC-1008

$5.00

WPC 95
<MPU to A/V PCB
J201, J601
CABRC-1101

$6.50 

WPC 95
<MPU to A/V PCB
J202, J602
CABRC-1102

$6.50

System 11
MPU to Display
J22, J1
CABRC-2001

 

 

 

 

$10.00

System 11
MPU to Sound PCB
J21, J4
CABRC-2002

 

 

 

 

$5.00